SoloCam C210 - Camera update troubleshooting
Modified on: Wed, 10 Dec, 2025 at 11:28 AM
1. Please check if the router network is absolutely great.
2. Please try to make sure the signal between the camera and the router is great.
3. Please check the camera LED status:
a. If the status LED is Red and Blue alternately flashing, that means the camera is updating. Please wait for about 5 minutes and check the camera status again.
b. If the status LED is off, please press the SYNC button on the camera. If the status LED is flashing blue, that means the camera is powered on. If the status LED is flashing red, that means the camera is in a low battery. Please charge the battery to full, and then update it later in-camera settings > Device Info > Check for the firmware update.
If the above steps still can’t solve the update issue, please feel free to contact us.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article